Control Solenoid Valve and Transmission Control Module Assembly Inspection

Fig 1: Identifying Control Solenoid Valve & Transmission Control Module Assembly

Courtesy of GENERAL MOTORS COMPANY

1. Inspect the control solenoid valve assembly connectors and pins (1, 2, 11, 13) for the following conditions:
   • Damage
   • Bent pins
   • Debris
   • Broken retaining tab
   • Contamination
2. Ensure no metallic debris is inside the connectors near the terminal pins.
3. Inspect the control solenoid valve assembly solenoid leads (3) for contamination or metallic debris.
4. Inspect the 4 control solenoid valve assembly filter plate retaining tabs (12) for cracks and ensure proper tension when filter plate is attached.

Solenoid Resistance

Solenoid Name	Illustration Number of Solenoid Lead	Expected Resistance (Ohms)
Line Pressure Control Solenoid	3	4.5 - 5.2 Ω
Pressure Control Solenoid 2 (PCS2)	5	4.5 - 5.2 Ω
Pressure Control Solenoid 3 (PCS3)	9	4.5 - 5.2 Ω
Pressure Control Solenoid 4 (PCS4)	4	4.5 - 5.2 Ω
Pressure Control Solenoid 5 (PCS5)	8	4.5 - 5.2 Ω
Shift Solenoid 1 (SS1)	10	22 - 25 Ω
Shift Solenoid 2 (SS2)	6	22 - 25 Ω
Torque Converter Clutch (TCC) Pressure Control Solenoid	7	4.5 - 5.2 Ω