LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (LFX LF3) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Oil Pressure Sensor and/or Switch Replacement (LF3)

Engine Oil Pressure Sensor and/or Switch Replacement (LF3)

Fig 1: Engine Oil Pressure Sensor and/or Switch (LF3)
GM3319674Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the generator. Refer to Generator Replacement (LF3) .
1 Disconnect the oil pressure sensor electrical connector.
2 Engine Oil Pressure Sensor and/or Switch
Tighten 
20 N.m (15 lb ft)
Special Tools 
EN-41712  Oil Pressure Switch Socket
For equivalent regional tools, refer to Special Tools .