X900 License Lamp Harness to Body Harness


Connector Part Information Harness Type: License Lamp OEM Connector: AIT2PB-10P-2AK Service Connector: Service by Harness - See Part Catalog Description: 10-Way F 0.64 Kaizen Series (BK)	Connector Part Information Harness Type: Body OEM Connector: AIT2WSB-10A-2AK Service Connector: 19177677 Description: 10-Way M 0.64 Kaizen Series (BK)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	Not Required	J-35616-64B (LT BU)	No Tool Required	Not Required	Not Required	Not Required	Not Required
II	19299859	J-35616-65B (LT BU)	J-38125-215A	SAITW-A03T-064	Delphi 20	J	J

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	0.5	BK	2350	I	-	Ground	1	0.5	BK	2350	II	-
2	0.5	GN/YE	6846	I	-	Rear License Lamp Control	2	0.5	GN/YE	6846	II	-
3	0.35	GN/WH	24	I	-	Backup Lamp Control	3	0.5	GN/WH	24	II	-
4	0.35	VT/BK	4669	I	-	Run/Crank Ignition 1 Voltage Rear Camera Control	4	0.5 0.5	VT/BK VT/BN	339 4669	II II	UVC UVH-CZ2
5	0.35	BK	6202	I	UVH-CZ2	Camera Ground	5	0.35	BN/BK	6202	II	UVH-CZ2
6	0.5	YE/BU	5797	I	-	Rear Closure Handle Switch Open Signal	6	0.5	YE/BU	5797	II	-
7	-	-	-	-	-	Not Occupied	7	-	-	-	-	-
8	0.35	WH/BU	6973	I	-	Camera Signal 2	8	0.5	WH/BU	6973	II	-
9	0.35	GY/YE	6972	I	-	Camera Signal 2 +	9	0.5	GY/YE	6972	II	-
10	0.5	BARE	6974	I	-	Camera Low Reference	10	0.5	BARE	6974	II	-CZ2