Instrument Panel Trim Plate Applique Replacement - Right Side

Fig 1: Instrument Panel Trim Plate Applique - Right Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Trim Pad Replacement - Right Side
1	Instrument Panel Trim Plate Bolt CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Trim Plate Applique - Right Side Procedure Use a flat bladed plastic trim tool. Disconnect electrical connections, if applicable. Transfer components as necessary.

Callout

Component Name

Instrument Panel Trim Plate Bolt

CAUTION:

Tighten
2.5 N.m (22 lb in)

Instrument Panel Trim Plate Applique - Right Side

Procedure