LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XT5 Platinum >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Front Fender Upper Rear Molding Replacement

Front Fender Upper Rear Molding Replacement

Fig 1: Front Fender Upper Rear Molding
GM4298803Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Open the front side door.
1 Front Fender Upper Rear Molding Retainer (Qty: 3)
2 Front Fender Upper Rear Molding

Procedure

  1. Apply a suitable tape around the front fender upper rear molding.
  2. Using a suitable trim-type release tool, carefully release the front fender upper rear molding retainers.
  3. Replace retainers if necessary.
scientia non olet · About LEMON Manuals