Stabilizer Shaft Link Replacement (Light Duty)

Fig 1: Stabilizer Shaft Link (1500)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (6-Lug Wheel)
1	Front Stabilizer Shaft Link Nut CAUTION: Refer to Fastener Caution . Procedure Remove all traces of the original adhesive patch. Tighten 23 N.m (17 lb ft)
2	Front Stabilizer Shaft Link Bolt Procedure Remove all traces of the original adhesive patch. Apply thread locking adhesive to the bolt. Refer to Adhesives, Fluids, Lubricants, and Sealers
3	Front Stabilizer Shaft Link Washer (Qty: 2)
4	Front Stabilizer Shaft Link Insulator (Qty: 4)
5	Front Stabilizer Shaft Link Spacer