LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> Escalade ESV Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Antilock Brake System) >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2017 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X1 harness connector at the S48A Multifunction Switch - Instrument Panel.
  2. Test for infinite resistance between the signal circuit terminal 17 and the ground terminal 14 with the switch in the open position.
    • If less than infinite resistance 

      Replace the S48A Multifunction Switch - Instrument Panel.

    • If infinite resistance 
  3. Test for less than 2 Ω between the signal terminal 17 and the ground terminal 14 with the switch in the closed position.
    • If 2 Ω or greater 

      Replace the S48A Multifunction Switch - Instrument Panel.

    • If less than 2 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals