Transmission Mount Replacement (Two Wheel Drive)

WARNING: This page is about a different car, the 2017 GMC Yukon XL, 2017 GMC Yukon, 2017 Chevrolet Tahoe, and 2017 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Mount (2WD)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Support the transmission with a transmission jack.
1	Transmission Mount to Crossmember Nut CAUTION: Refer to Fastener Caution . Tighten 55 N.m (41 lb ft)
2	Transmission Mount Bolt (Qty: 2) Tighten 67 N.m (49 lb ft)
3	Transmission Mount Procedure Raise the transmission with the transmission jack just enough to remove the transmission mount.