LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> Escalade ESV Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Mechanical - 6.0L (L96)) >> Repair Instructions - Off Vehicle >> Throttle Body Assembly Removal

Throttle Body Assembly Removal

WARNING: This page is about a different car, the 2017 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Throttle Body Assembly
    GM1401966Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.

  1. Remove the electrical wire harness connectors from the throttle body.
  2. Remove - Throttle Body Nut (507) andThrottle Body Bolt (538).
  3. Remove - Throttle Body (508).
  4. Remove and DISCARD the throttle body gasket. (509)
scientia non olet · About LEMON Manuals