LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> Escalade ESV Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls And Fuel - 6.0L (L96) - Repair Instructions) >> Repair Instructions >> Evaporative Emission System Hose/Pipe Replacement (Front Tank) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Tank EVAP Lines
    GM1705659Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel/EVAP lines to the fuel tank.
    2. Fig 2: View Of Fuel Tank Clips
    GM1705656Courtesy of GENERAL MOTORS COMPANY
  2. Connect the fuel/EVAP line quick connect fittings at the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the fuel/EVAP lines to the fuel tank clips (2-7) and close the clips.
  4. Install the fuel/EVAP line to the fuel tank clip (1).
    5. Fig 3: View Of Fuel Tank Shield & Retainers
    GM1705654Courtesy of GENERAL MOTORS COMPANY
  5. Install the fuel tank shield (2) and retainers (1).
  6. Install the fuel tank. Refer to Fuel Tank Replacement (Front Tank) .
scientia non olet · About LEMON Manuals