LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> Escalade ESV Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Transfer Case - Mp 3010 (NP0)) >> Repair Instructions - Off Vehicle >> Transfer Case Disassemble >> Transfer Case Rear Case Half Removal

Transfer Case Rear Case Half Removal

WARNING: This page is about a different car, the 2017 GMC Yukon XL, 2017 GMC Yukon, 2017 Chevrolet Tahoe, and 2017 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transfer Case Rear Case Half
GM2914249Courtesy of GENERAL MOTORS COMPANY
Transfer Case Rear Case Half Removal

Callout Component Name
1 Transfer Case Bolts (Qty: 17)
2 Transfer Case Bracket
3 Transfer Case Rear Case Half
CAUTION:

Refer to Machined Surface Damage Caution .

NOTE:
  • Use opposing pry bars at casting bosses to spread the case.
  • Use snap ring pliers to release the transfer case rear output shaft outer retaining ring from the transfer case rear output shaft rear bearing assembly.
scientia non olet · About LEMON Manuals