Input Shaft Oil Seal Removal

WARNING: This page is about a different car, the 2017 GMC Yukon XL, 2017 GMC Yukon, 2017 Chevrolet Tahoe, and 2017 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Illustrating Proper Input Shaft Oil Seal Installation

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Input Shaft Oil Seal CAUTION: Refer to Machined Surface Damage Caution . Procedure Drill a pilot hole, as required, and insert a self-tapping screw into the body of the seal. Use a plier or slide hammer type tool to remove the seal from the bore.