Conditions for Running the DTC

WARNING: This page is about a different car, the 2017 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

P0010, P2088, P2089

Ignition Voltage=Greater than 11 V
Ignition Switch Position=Run/Crank
Camshaft Position Actuator Solenoid Valve=On

Frequency the DTC runs=Continuously - After the running conditions are met

P0011

DTC P0010, P0016, P0335, P0336, P0340, P0341 = Not set
Ignition Voltage=Greater than 11 V
Engine=Running
Desired Camshaft Position=Does not vary greater than 7.5 ° - For greater than 2 s
Camshaft Position Actuator=Enabled
Power Take-Off Switch=Off - If equipped

Frequency the DTC runs=Continuously - After the running conditions are met