Liftgate Strut Replacement (Power Assist)

Fig 1: Liftgate Strut (Power Assist)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
1	Liftgate Strut Procedure Using a small flat bladed tool to retract clip slightly while removing the lock tabs. Ensure the clip is fully seated when rod is reinstalled. If clip cannot be fully seated, a new rod should be installed Liftgate Calibration

Callout

Component Name

WARNING:

When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Liftgate Strut

Procedure

Using a small flat bladed tool to retract clip slightly while removing the lock tabs.
Ensure the clip is fully seated when rod is reinstalled. If clip cannot be fully seated, a new rod should be installed
Liftgate Calibration