Front Bumper Fascia Replacement (Chevrolet)

Preliminary Procedure

1. Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement (Chevrolet)
2. Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement - Left Side (Chevrolet) , and Front Wheelhouse Liner Replacement - Right Side (Chevrolet) .

Procedure

1. Carefully push a small nylon wedge between the fascia and the front fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the front fascia guide.
2. Release the front center grille support tabs using the appropriate tool from beneath the vehicle with assistance.
3. Disconnect the electrical connectors before attempting removal of the front bumper fascia.
4. Remove the fascia from the vehicle with assistance.
5. Transfer parts as necessary.