Catalytic Converter Replacement - Right Side (LT4)
| Callout | Component Name |
|---|---|
|
WARNING:
In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.
WARNING:
Avoid contact with HOT components. Wear safety glasses and protective gloves to avoid personal injury. Preliminary Procedures
|
|
| 1 | Catalytic Converter Nut (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten 50 N.m (37 lb ft) |
| 2 | Catalytic Converter Procedure Install a NEW catalytic converter gasket. |