LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS V >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L (LT4) - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Purge Pipe Replacement >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Safety Glasses Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle (CTS)Lifting and Jacking the Vehicle (CTS-V)
  2. Fig 1: Evaporative Emission Canister Purge Pipe
    GM2815762Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the evaporative emission canister purge pipe (1) from the fuel tank vent valve hose. Plastic Collar Quick Connect Fitting Service 
  4. Remove the right rear wheelhouse panel liner. Rear Wheelhouse Liner Replacement
  5. Fig 2: Fuel Line Tie Straps
    GM2815773Courtesy of GENERAL MOTORS COMPANY
  6. Remove the tie straps (1) attaching the evaporative emission canister purge pipe to the fuel tank filler pipe.
  7. Remove the evaporative emission canister purge pipe (3) from the retainers (2).
  8. Remove the evaporative emission canister purge pipe (3) from the EVAP emission canister. Plastic Collar Quick Connect Fitting Service