LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS V >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L (LT4) - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Purge Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Line Tie Straps
    GM2815773Courtesy of GENERAL MOTORS COMPANY
  1. Install the evaporative emission canister purge pipe (3) to the EVAP emission canister. Plastic Collar Quick Connect Fitting Service 
  2. Install the evaporative emission canister purge pipe (3) to the retainers (2).
  3. Install NEW tie straps (1) to attach the evaporative emission canister purge pipe to the fuel tank filler pipe.
  4. Install the right rear wheelhouse panel liner. Rear Wheelhouse Liner Replacement
    5. Fig 2: Evaporative Emission Canister Purge Pipe
    GM2815762Courtesy of GENERAL MOTORS COMPANY
  5. Connect the evaporative emission canister purge pipe (1) to the fuel tank vent valve hose. Plastic Collar Quick Connect Fitting Service 
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals