Front End Sheet Metal Cross Brace Replacement (CTS)

Fig 1: Front End Sheet Metal Cross Brace (CTS)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (CTS)
1	Front End Sheet Metal Cross Brace Bolt - to Impact Bar (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten  9 N.m (80 lb in)
2	Front End Sheet Metal Cross Brace (Qty: 2)