Intake Manifold Disassemble (LGX)
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | Intake Manifold Insulator Retainer |
| 2 | Intake Manifold Insulator |
| 3 | Throttle Body Bolt |
| 4 | Throttle Body |
| 5 | Throttle Body Gasket
NOTE:
Remove and DISCARD the gasket. |
| 6 | Evaporative Emission Canister |
| 7 | Manifold Absolute Pressure Sensor Bolt |
| 8 | Manifold Absolute Pressure Sensor |
| 9 | Intake Manifold Seal
NOTE:
Remove and DISCARD the seal. |