Reaction Internal Gear and 1-2-3-4-5 Reverse Hub and 1-2-3-4-5 Reverse Clutch Plate Assembly Installation
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4-5 Reverse Clutch (Waved) Plate |
| 2 | 1-2-3-4-5 Reverse Clutch Apply Plate |
| 3 | 1-2-3-4-5 Reverse Clutch Plate Assembly (Qty: 3) |
| 4 | 1-2-3-4-5 Reverse Clutch Plate (Qty: 2) |
| 5 | 1-2-3-4-5 Reverse Clutch Backing Plate |
| 6 | 1-2-3-4-5 Reverse Clutch Backing Plate Retaining Ring (Selective) Procedure Select the correct retaining ring. Refer to 1-2-3-4-5 Reverse Clutch Backing Plate Retaining Ring Measurement .
NOTE:
The opening of the retaining ring should be in the 9 o'clock position as indicated by the arrow.
|
| 7 | Reaction Carrier Thrust Bearing (8L45 Only) |
| 8 | Reaction Internal Gear and 1-2-3-4-5 Reverse Hub Assembly |
| 9 | 1-2-3-4-5 Reverse Clutch Hub Thrust Bearing |