Control Valve Solenoid Body Assembly Removal
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Control Valve Solenoid Body Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Control Valve Solenoid Body Bolt M5 x 45 (Qty: 8) |
| 2 | Control Valve Solenoid Body Assembly |
| 3 | Cooler Flow Blowoff Ball Valve (Qty: 4 or 5 Model Dependent)
NOTE:
Note the position of the ball check valves.
|
| 4 | Control Valve Body Spacer Plate Assembly
CAUTION:
Do not use the old spacer plate. Install a NEW spacer plate. Reusing an old spacer plate may cause internal transmission leaks and transmission damage.
|
| 5 | Spacer Plate Retainer (Qty: 2)
NOTE:
Discard the retainers, they are not reusable.
|
| 6 | Automatic Transmission Auxiliary Fluid Pump Ball Check Valve (Qty: 1 Without Surge Accumulator) (Qty: 3 With Surge Accumulator)
NOTE:
Note the position of the ball check valve.
|
| 7 | Cooler Flow Blowoff Ball Valve (Qty: 1)
NOTE:
Note the position of the ball check valve.
|