1-2-3-4-5-Reverse Clutch Piston Dam Removal
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
1-2-3-4-5-Reverse Clutch Piston Dam Removal
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4-5-Reverse Clutch Piston Dam Retaining Ring Procedure Use DT-47693-2 compressor and an arbor press to remove the retaining ring.
NOTE:
Discard the retaining ring, it is not reusable. Special Tools DT-47693-2 Compressor For equivalent regional tools, refer to Special Tools . |
| 2 | 1-2-3-4-5-Reverse Clutch Piston Dam |
| 3 | 1-2-3-4-5-Reverse Clutch Piston Dam Seal
CAUTION:
Refer to Seal Reuse Caution
.
|
| 4 | 1-2-3-4-5-Reverse Clutch Piston Return Spring |