1-2-3-4-5 Reverse Clutch Piston Installation

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 1-2-3-4-5 Reverse Clutch Piston

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Output Shaft Bearing Special Tools DT-51087 Bearing Installer GE-8092 Driver Handle For equivalent regional tools, refer to Special Tools .
2	1-2-3-4-5-Reverse Clutch Piston Dam Inner Seal (O-ring) CAUTION: Refer to Seal Reuse Caution . NOTE: Install a NEW seal, it is not reusable.
3	1-2-3-4-5-Reverse Clutch Piston Dam Inner Seal CAUTION: Refer to Seal Reuse Caution . NOTE: Install a NEW seal, it is not reusable.
4	1-2-3-4-5- Reverse Clutch Piston Outer Seal CAUTION: Refer to Seal Reuse Caution . NOTE: Install a NEW seal, it is not reusable.
5	1-2-3-4-5-Reverse Clutch Piston