Auxiliary Fluid Accumulator Installation

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Auxiliary Fluid Accumulator

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	A/Trans Auxiliary Fluid Accumulator Bleeder Valve NOTE: Ensure bleeder valve is securely tightened.
2	A/Trans Auxiliary Fluid Accumulator
3	A/Trans Auxiliary Fluid Accumulator Bolt (Qty: 3) Procedure Connect the accumulator solenoid electrical connector. Tighten 8 N.m (71 lb in)