4-5-6-7-8 Reverse Clutch Piston Removal
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
4-5-6-7-8 Reverse Clutch Piston Removal
| Callout | Component Name |
| 1 | 4-5-6-7-8 Reverse Clutch Piston Dam Retaining Ring
NOTE:
Discard the retaining ring, it is not reusable. Special Tools
For equivalent regional tools, refer to Special Tools |
| 2 | 4-5-6-7-8 Reverse Clutch Piston Dam Procedure Use the DT-50905 clutch air travel adapter with compressed air to remove the piston and piston dam as an assembly. Special Tools DT-50905 Clutch Air Travel Adapter For equivalent regional tools, refer to Special Tools |
| 3 | 4-5-6-7-8 Reverse Clutch Piston Dam Seal
CAUTION:
Refer to Seal Reuse Caution
|
| 4 | 4-5-6-7-8 Reverse Clutch Piston Return Spring
NOTE:
Note the orientation of the spring for assembly.
|
| 5 | 4-5-6-7-8 Reverse Clutch Piston |
| 6 | 4-5-6-7-8 Reverse Clutch Piston Stop
NOTE:
Note the orientation of the stop for assembly
|
| 7 | 4-5-6-7-8 Reverse Clutch Piston Seal
CAUTION:
Refer to Seal Reuse Caution
|