4-5-6-7-8 Reverse Clutch Plates Installation

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 4-5-6-7-8 Reverse Clutch Plates

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	4-5-6-7-8 Reverse Clutch (Waved) Plate NOTE: Align center tooth with notch on piston. Teeth on clutch plates go between notches on piston.
2	4-5-6-7-8 Reverse Clutch Plate (Qty: 4)
3	4-5-6-7-8 Reverse Clutch Plate Assembly (Qty: 4)
4	4-5-6-7-8 Reverse Clutch Backing Plate
5	4-5-6-7-8 Reverse Clutch Backing Plate Retaining Ring (Selective) Procedure Select the correct retaining ring. Refer to 4-5-6-7-8 Reverse Clutch Backing Plate Retaining Ring Measurement (8L90) NOTE: The retaining ring opening should be between the teeth on the clutch plates.