2-3-4-6-8 Clutch Plates Installation
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
2-3-4-6-8 Clutch Plates Installation
| Callout | Component Name |
| 1 | 2-3-4-6-8 Clutch Apply Ring
NOTE:
Tabs align with notches in piston.
|
| 2 | 2-3-4-6-8 Clutch (Waved) Plate
NOTE:
Two tabs on clutch plate align with large notches in housing.
|
| 3 | 2-3-4-6-8 Clutch Apply Plate |
| 4 | 2-3-4-6-8 Clutch Plate (Qty: 4) |
| 5 | 2-3-4-6-8 Clutch Backing Plate (Qty: 5) |
| 6 | 2-3-4-6-8 Clutch Backing Plate |
| 7 | 2-3-4-6-8 Clutch Backing Plate Retaining Ring (Selective) Procedure Select the correct retaining ring. Refer to 2-3-4-6-8 Clutch Backing Plate Retaining Ring Measurement (8L90)
NOTE:
The retaining ring opening should align with tooth without notch.
|