LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 1-3-5-6-7 Clutch Assemble (8L90) >> 1-3-5-6-7 Clutch Bearing Installation

1-3-5-6-7 Clutch Bearing Installation

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 1-3-5-6-7 Clutch Bearing
GM3703482Courtesy of GENERAL MOTORS COMPANY
1-3-5-6-7 Clutch Bearing Installation

Callout Component Name
1 1-3-5-6-7 Clutch Bearing
Procedure 
NOTE: Press on the marked side of the bearing.

Use DT-50906  installer and a press to install the bearing.
Special Tools 
DT-50906  Bearing Installer
For equivalent regional tools, refer to Special Tools .
scientia non olet · About LEMON Manuals