Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Install automatic transmission control wiring harness (4).
- Connect the wiring harness clips to the valve body and case.
- Connect the transmission control wiring harness connectors, ensure the valve body connector retainer is latched (3).
- Install the transmission fluid filter (4). Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (Rear Wheel Drive) and Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (All Wheel Drive) .