LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Torque Converter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. Refer to Transmission Replacement (M5U with LT4 Engine) , Transmission Replacement (M5N with LGX Engine)  and/or Transmission Replacement (M5N with LTG Engine) 
  2. Remove the converter holding strap (1) DT-21366  Converter Holding Strap from the transmission.
    Fig 1: Torque Converter
    GM3794716Courtesy of GENERAL MOTORS COMPANY
  3. Place a drain pan under the front of the transmission.
  4. Remove the torque converter (2) from the transmission.
scientia non olet · About LEMON Manuals