LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Fluid Pressure Test Hole Plug Replacement (Rear Wheel Drive) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (V-Series) and Lifting and Jacking the Vehicle (Base) .
  2. Clean the surrounding area of the automatic transmission fluid pressure test hole plug.
    Fig 1: Automatic Transmission Fluid Pressure Test Hole Plug
    GM4064483Courtesy of GENERAL MOTORS COMPANY
  3. Remove the automatic transmission fluid pressure test hole plug (1).
scientia non olet · About LEMON Manuals