Front Axle Propeller Shaft Heat Shield Replacement
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (V-Series) and Lifting and Jacking the Vehicle (Base) . If equipped with LGX, remove the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LGX) |
|
| 1 | Front Axle Propeller Haft Heat Shield Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution
. Tighten 9 N.m (80 lb ft) |
| 2 | Front Axle Propeller Shaft Heat Shield |