Windshield Multifunction Sensor Mount Bracket Cover Replacement (Without UEU, UFL)

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Windshield Multifunction Sensor Mount Bracket Cover (Without UEU, UFL)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Windshield Multifunction Sensor Mount Bracket Cover Procedure Disengage the cover from the sides of the bracket by lifting on the sides of the cover next to the glass surface. With the cover assembly loose, disengage the locking tabs on each side to separate the top and bottom halves of the cover. NOTE: This is a blind operation: to unlock the top and bottom covers, flex the top cover at the locking tab outboard and flex the bottom cover at the tab inboard.

Callout

Component Name

Windshield Multifunction Sensor Mount Bracket Cover

Procedure

Disengage the cover from the sides of the bracket by lifting on the sides of the cover next to the glass surface.
With the cover assembly loose, disengage the locking tabs on each side to separate the top and bottom halves of the cover.
NOTE:
This is a blind operation: to unlock the top and bottom covers, flex the top cover at the locking tab outboard and flex the bottom cover at the tab inboard.