Steering Column Tilt Wheel and Telescope Control Module Replacement

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Column Tilt Wheel & Telescope Control Module & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Steering Column Upper Trim Cover Replacement Steering Column Lower Trim Cover Replacement (With N38) Instrument Panel Knee Bolster Replacement
1	Steering Column Tilt Wheel and Telescope Control Module Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Steering Column Tilt Wheel and Telescope Control Module Procedure Disconnect the electrical connectors. After installation and before the steering column upper and lower trim covers are installed, relearn the soft and hard stops. Refer to Steering Column Tilt Wheel and Telescope Control Module Learn NOTE: In order to relearn the steering column soft and hard stops, the steering column MUST be mounted and fastened and the steering column upper and lower trim covers CANNOT be installed.

Callout

Component Name

Preliminary Procedures

Steering Column Upper Trim Cover Replacement
Steering Column Lower Trim Cover Replacement (With N38)
Instrument Panel Knee Bolster Replacement

Steering Column Tilt Wheel and Telescope Control Module Bolt [2x]

CAUTION: Refer to Fastener Caution .

Tighten
3 N.m (27 lb in)

Steering Column Tilt Wheel and Telescope Control Module

Procedure

Disconnect the electrical connectors.
After installation and before the steering column upper and lower trim covers are installed, relearn the soft and hard stops. Refer to Steering Column Tilt Wheel and Telescope Control Module Learn

NOTE: In order to relearn the steering column soft and hard stops, the steering column MUST be mounted and fastened and the steering column upper and lower trim covers CANNOT be installed.