Rear Seat Back Cushion Removal and Installation (without AM9)

Fig 1: Rear Seat Back Cushion (Without AM9)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation . Remove the rear compartment rear window lower trim. Refer to Rear Compartment Rear Window Lower Trim Replacement
1	Rear Seat Back Cushion Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Rear Seat Back Cushion Nut (Qty: 3) Tighten 22 N.m (16 lb ft)
3	Rear Seat Back Cushion Assembly Procedure Pull the seat back cushion forward and upward to remove from the vehicle.