Circuit/System Testing
- Verify the USB cable is properly connected and there is no damage to the cable or connections.
- If connection problems or cable damage is noted.
Perform the appropriate repair or replacement to correct any issues.
- If no connection problems or cable damage is noted.
- If connection problems or cable damage is noted.
- Connect the EL-50334-50 to the frontview camera connector and the performance data recorder connector X4.
- Ignition ON, performance data recorder system ON.
- Verify the frontview camera operates properly while operating the performance data recorder system.
- If frontview camera does not operate properly
- Replace the B174 Frontview Camera.
- Verify the frontview camera operates properly while operating the performance data recorder system.
- If frontview camera does not operate properly
Replace the K161 Performance Data Recorder.
- If frontview camera operates properly
All OK
- If frontview camera does not operate properly
- If frontview camera operates properly
- Replace the USB harness.