High Mount Stop Lamp Replacement (With C24)

Fig 1: High Mount Stop Lamp

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Headlining Trim Panel Replacement (Without C3U)Headlining Trim Panel Replacement (With C3U) Remove both auxiliary air conditioning air outlet ducts. Refer to Auxiliary Air Conditioning Air Outlet Duct Replacement (Right Side) and/or Auxiliary Air Conditioning Air Outlet Duct Replacement (Left Side)
1	High Mount Stop Lamp Nut [6x] CAUTION: Refer to Fastener Caution . Tighten 4.7 N.m (42 lb in)
2	High Mount Stop Lamp Retainer [2x] Procedure Release both retainers from inside vehicle to remove high mount stop lamp.
3	High Mount Stop Lamp Disconnect the electrical connector. Reposition the reveal molding as necessary. NOTE: Ensure that the rear glass reveal molding is not trapped below the high mount stop lamp during the installation.