Knock Sensor Replacement - Bank 2 (LFX FWD)

Fig 1: Knock Sensor - Bank 2 (LFX FWD)

GM2754764

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .

1

Knock Sensor Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
25 N.m (18 lb ft)

2

Knock Sensor
Procedure
Disconnect the electrical connector.