LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> XTS Premium, AWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Fuel Feed Hose Replacement (LFX) >> Removal Procedure

Removal Procedure

  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LFX) .
  2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
    3. Fig 1: Fuel Feed Hose (LFX)
    GM2756290Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the fuel feed hose (1) from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .
  4. Unclip the fuel feed hose from the retainers.
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  6. Lower the rear of the drivetrain and front suspension frame 51 mm (2 in). Refer to Drivetrain and Front Suspension Frame Replacement .
  7. Unclip the fuel feed hose from the line retainer on the cowl panel.
    8. Fig 2: Fuel Feed Hose
    GM2202360Courtesy of GENERAL MOTORS COMPANY
  8. Disconnect the fuel feed hose (1) from the fuel feed pipe. Refer to Plastic Collar Quick Connect Fitting Service .
  9. Remove the fuel feed hose (1) from the retainers.
  10. Remove the fuel feed hose (1) from the vehicle.
scientia non olet · About LEMON Manuals