X910 Autonet Harness to Body Harness
Connector Part Information
|
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | No Tool Required | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| II | Not Required | J-35616-3 (GY) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| III | Not Required | J-35616-34 (YE) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Terminal Type ID | Option | Function | Pin | Size | Color | Circuit | Terminal Type ID | Option |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0.5 | VT/WH | 639 | I | - | Run/Crank Ignition 1 Voltage | 1 | 0.5 0.5 |
VT/WH VT/WH |
639 639 |
II III |
UVZ/UGN -UVZ/UGN |
| 2 | 0.5 | BK | 2550 | I | - | Ground | 2 | 0.5 0.5 |
BK BK |
2550 2550 |
II III |
UVZ/UGN -UVZ/UGN |