Hood Primary Latch Release Cable Replacement

Fig 1: Hood Primary Latch Release Cable & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement . Remove the hood primary and secondary latch. Refer to Hood Primary and Secondary Latch Replacement . Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement . Remove the front driver side door sill garnish molding. Refer to Front Side Door Sill Garnish Molding Replacement .
1	Hood Primary Latch Cable Procedure Disconnect the hood primary latch release cable from the primary hood latch.
2	Hood Primary Latch Release Cable Retainer Procedure Disconnect the hood primary latch release cable from the hood primary latch release cable retainer.
3	Hood Primary Latch Release Cable Grommet Procedure Ensure the grommet is properly seated in the cowl wiper pocket to prevent water leaks.
4	Hood Primary Latch Release Cable Procedure Disconnect the hood primary latch release cable handle from the hood latch cable bracket.