LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> XTS Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T70 (M7U), 6T75 (M7V), Or 6T80 (Mhm) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Front Mount Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the transmission with a suitable jack.
  3. Remove the wire harness retainer at the front transmission mount bracket.
    4. Fig 1: Identifying Front Transmission Mount Through Bolt
    GM2199369Courtesy of GENERAL MOTORS COMPANY
  4. Remove the front transaxle mount through bolt (1).
    5. Fig 2: Transaxle Mount & Attachment Bolts
    GM2199370Courtesy of GENERAL MOTORS COMPANY
  5. Remove and discard the three transaxle mount-to-transaxle attachment bolts (2).
  6. Lower the vehicle.
  7. Remove the transaxle mount (1) from the vehicle.
scientia non olet · About LEMON Manuals