Manual Shift Shaft and Seal Replacement

Fig 1: Identifying Manual Shift Shaft & Seal

GM1809057

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Remove the battery tray. Refer to Battery Tray Replacement .
Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .

1

Manual Shift Shaft Seal

For seal removal use J 45201 Cooler Line Seal Remover.
For seal installation use J-46626 Seal Installer.
Lubricate the manual shaft with automatic transmission fluid (ATF) to prevent damage to the manual shift shaft seal.

Special Tools

J 45201 Cooler Line Seal Remover
J-46626 Seal Installer