LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Drive Belt Idler Pulley Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Drive Belt Idler Pulley
    GM1826824Courtesy of GENERAL MOTORS COMPANY
  1. Install the drive belt idler pulley.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the drive belt idler pulley bolt and tighten to

    Tighten 

    58 N.m (43 lb ft).

  3. Install the drive belt. Refer to Drive Belt Replacement .
scientia non olet · About LEMON Manuals