LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Cylinder Head Replacement - Right Side (LF1, LFW, or LFX) >> Removal Procedure

Removal Procedure

  1. Remove the right bank secondary timing chain. Refer to Secondary Camshaft Intermediate Drive Chain Replacement - Right Side .
  2. Remove the power brake booster pump aside.
  3. Remove the catalytic converter. Refer to Catalytic Converter Replacement - Right Side (Rear) .
    4. Fig 1: Right Cylinder Head & Bolts
    GM2202033Courtesy of GENERAL MOTORS COMPANY
  4. Remove the right cylinder head bolts (1).
  5. Remove the right cylinder head (2).
  6. Remove Ground wire and harness and position aside.
    7. Fig 2: Right Cylinder Head Gasket
    GM2202034Courtesy of GENERAL MOTORS COMPANY
  7. Remove and discard the cylinder head gasket (1).
  8. Clean and inspect the cylinder head and the engine block sealing surfaces. Refer to Cylinder Head Cleaning and Inspection , and Engine Block Cleaning and Inspection .
  9. Transfer parts as needed. Refer to Cylinder Head Disassemble (LFW or LFX) , and Cylinder Head Assemble (LFW or LFX) .
scientia non olet · About LEMON Manuals