LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Crankshaft Front Oil Seal And Installer
    GM2716895Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces.

  1. Use the EN-29184  installer (1) or equivalent to install the crankshaft front oil seal (2).
  2. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
scientia non olet · About LEMON Manuals