LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Camshaft Cover Replacement - Right Side (LF1, LFW, or LFX) >> Removal Procedure

Removal Procedure

  1. Remove the ignition coils. Refer to Ignition Coil Replacement - Bank 1
  2. Disconnect and remove the engine harness from the camshaft cover.
    3. Fig 1: Removing & Installing Camshaft Cover
    GM902873Courtesy of GENERAL MOTORS COMPANY
  3. Remove the right camshaft cover bolts.
  4. Remove the right camshaft cover from the right cylinder head.
  5. Clean the mating surfaces of the cylinder head and the camshaft cover. Refer to Camshaft Cover Cleaning and Inspection
    6. Fig 2: Installing EN 46101 Into Spark Plug Holes
    GM1306485Courtesy of GENERAL MOTORS COMPANY
  6. Install the EN-46101  guide onto the spark plug tubes of the right cylinder head.
scientia non olet · About LEMON Manuals