LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Piston, Connecting Rod, and Bearing Cleaning and Inspection >> Connecting Rod Cleaning Procedure

Connecting Rod Cleaning Procedure

  1. Clean the connecting rods in solvent.
    2. WARNING:

    Refer to Safety Glasses Warning .

  2. Dry the connecting rod using compressed air.
  3. Remove the connecting rod cap and clean the threads.
  4. Remove the connecting rod bearing and discard. Never reuse a connecting rod bearing used in a running engine.
scientia non olet · About LEMON Manuals