LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Drive Belt Tensioner Installation - Left Side

Drive Belt Tensioner Installation - Left Side

    Fig 1: Drive Belt Tensioner Bracket Bolts
    GM1395909Courtesy of GENERAL MOTORS COMPANY
  1. Place the left drive belt tensioner assembly in position to the engine front cover.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the left drive belt tensioner bracket bolts and tighten to 23 N.m (17 lb ft).
scientia non olet · About LEMON Manuals